Vertical panel saws are intended particularly for cutting flat objects resembling massive boards. The panel saw has a large outer casing with horizontal props. Two cylindrical vertical facing shafts in the center help maintain the saw. The saw is designed with huge giant sheets that is place in opposite side of the saws frame; allowing to cut or slice in all direction, from left to right and top to bottom.

If you have a small work area, a vertical panel saw may be most appropriate as horizontal saws call for far more working space.When choosing your saw it’s good to assess the kind of work that you do. Most customers agree that a vertical panel noticed is greatest for cross cutting and easier on the back than a horizontal saw. Many people don’t recommend for bulk work, but newer models are ideal for dealing with large volume.

There’s a lot of security precautions that it is advisable to follow if you are going to buy a vertical panel saw.  First read and make sure that you understand the consumer manual. Set up of the saw is vital for safety measures. Many customers take would not take the time in properly tightening the bolts on their saws which is really hazardous . Once put in place ensure that the blade that you just bought shall be right for the item you’re about to cut. By no means force the saw as this will consequence in the blade being damaged and jagged cut.. Your fingers ought to by no means be anyplace close to to the blade. Safety glasses and a dust masks ought to at all times be worn when using your vertical panel saw. When cutting massive items it’s best to at all times have an assistant.

In conclusion there are lots of people which can be happy with their vertical panel saw however the people which are not happy with their saws might have bought a superior brands or most up to date models. The person should analyze which brands of vertical panel saws offer the best quality at the perfect price. At times it may be higher to spend a bit more and be capable to deliver superior work.

Manual and automatic vertical panel saws both have their respective merits, so choosing which type to buy depends on the type of work it will have to carry out.

Basically, there are four distinct advantages of using a manual machine compared to an automatic model. They are cheaper to buy, simpler to use, easier to maintain, and are far quicker when sizing small pieces of wood, plastic or other sheet material.

For a manual machine to be the right choice for you it has to be easy to use, both in terms of the machine’s ergonomics and in the effort required by the operator.

A badly designed, heavy-to-use saw loses many of the advantages of a manual machine. It will be tiring to operate and more likely to become damaged. A good manual machine needs to be quick to set up, so as to cope with short production runs, but also robust enough to cope with periods of heavy use.

Manually operated vertical panel saws from Striebig, the global market leader, are unrivalled in the quality of their design and manufacture. The robust machines are superbly engineered, making them extremely easy and light to use despite their heavy duty construction.

There are several advantages to using automatic vertical panel saws in the appropriate working environment.

Automatic machines offer a choice of feed speeds, which means that the optimum speed for the specific item and type of sheet material to be sized can be selected. A constant feed speed enhances the cut quality as there are no jerky movements during the sizing process.

With an automatic there is less manual input required from the machine’s operator, and less chance of careless use damaging the machine. An important advantage is that the use of an automatic vertical panel saw frees up the operator to unload the machine and prepare for the next cut as the saw head returns, which boosts productivity. It has to be pointed out that an automatic vertical panel saw is not a CNC machine, but a saw with a powered cut cycle and more advanced control features. This makes it ideal for higher production applications without being as expensive as a quality beam saw.

The challenge is to find an automatic saw with all the right features which is simple and easy to use. An automatic machine with complex or confusing controls and poor engineering is likely to be a burden rather than an advantage.

Striebig is well known for its two popular automatic models, the Compact AV and the Control, which are designed and built to the same high quality as its manual machines.

Both are extraordinarily easy to use. Alongside convenient and simple controls, an advanced PLC system passes error and fault finding messages to the operator, preventing any incorrect use.

Their advanced design allows Striebig to offer the increased efficiency required from a machine of this type without any compromise to reliability.

To sum up, both manual and automatic Striebig Vertical Panel Saws offer different advantages and choosing between them is all about the type and level of work they will have to do.

Matt Pearce, is the sales coordinator at machinery equipment supplier T.M. Machinery Sales. He has 10 years and 800 machines worth of experience. Website tmmachinery.co.uk contact him at matt@tmservices.co.uk Tel +44 (0)1162 717155

Article Source: http:// EzineArticles.com/ ?expert=Matt_Pearce

Whilst a beam saw is the right piece of machinery for use when a large number of boards need to be cut to set sizes on a regular basis, and a flat bed saw is ideal for angles, mitres and small-piece work, a vertical panel saw is the perfect tool for almost all other panel sizing operations.

Where individual panels or small batches need sizing, a panel saw, also known as a wall saw, is much quicker than using a beam saw. For sizing square panels a vertical panel saw is also much more efficient than a flat bed version.

Consider these two very common workshop situations where having a panel saw brings distinct advantages.

Firstly, in a low to medium volume production environment. My experience is that given the choice, operators like to cut all the large panels on a vertical panel saw, with only very small pieces or angle work carried out on a small flat bed or dimension saw

Secondly, in a high volume production environment it’s best to use a beam saw for all the large batch work. A vertical panel saw is commonly used in conjunction with the beam saw to cut the smaller batches of work that would block up the beam saw and severely decrease its efficiency.

Here’s a summary of the main benefits of a vertical panel saw over a flat bed saw for square panel work:

Space saving. It takes up a much smaller footprint compared to a flat bed panel saw for cutting the same size panels;

Labour saving. You only need to handle the full sheet once. It’s then just a one man operation to cut the boards;

Accuracy. There’s no reliance on the operator to keep the board square to the fence;

Safety. Vertical panel saws are extremely safe. The blade is always covered and its’ incorrect use is prevented;

Reveals. These can easily be cut in a board by a vertical panel saw;

Cut quality. You have the option of a constant feed speed automatic cut cycle to give superb edges.

So what are the main benefits of a vertical panel saw over a beam saw for square panel work? They are:

Space saving. As already mentioned, they require a much smaller footprint compared to a flat bed panel saw for cutting the same size panels;

Set-up time. A fast set-up makes a vertical panel saw much quicker for cutting individual or small numbers of panels;

Price. A high specification fully automatic panel saw, such as a Striebig, is cheaper than an entry level beam saw.

We can provide a tailor-made Swiss Striebig panel saws to suit each customer’s needs. They are suitable for cutting practically all sheet materials, such as wood-based panels, plaster board, plastics and aluminum panels, and are available with a two-year parts and labour warranty.

There’s a choice of five models, nine standard frame sizes and a huge range of options for added productivity. They all come with guarding, braking, noise control and dust extraction that far surpasses current European health and safety legislation, and are accurate to 0.1mm with unmatched cut quality

Striebig users benefit from 40 years of research and development from a company that specializes only in the design and manufacture of highly advanced vertical panel saws.

All machines have conveniently and logically grouped controls, and are evenly balanced and smooth running with only minimal physical effort required by the operator.

Vertical Panel Saws also called Wall Saws are long-lasting and commonly found in operation after more than 25 years’ use. Add to this their high resale value and the fact that they are the most sought after second-hand machine of their type.\

Matt Pearce, sales coordinator at woodworking machinery equipment supplier, T.M. Machinery Sales specialising in Striebig Wall Saws with two decades expertise in delivering both sales and after-sales service.

Article Source: http:// EzineArticles.com/ ?expert=Matt_Pearce